Description

Dodge Cummins 3942336 ECM

Module Experts carries a full line of Remanufactured Dodge Cummins ECM’s. Whether or not you are looking for a Remanufactured Dodge Cummins 3942336 ECM tomorrow or looking to send yours into be rebuilt we have your solution. 

The 1998 – 2002 Dodge Ram 2500 & Ram 3500 series vehicles were equipped with the New 24 Valve Cummins engines. They utilized a VP44 injection pump which was electronically controlled by a Cummins 1 plug ECM P/N 3942336 (Engine Control Module)or FCM (Fuel Control Module) that mounts to the side of the block hence the terminology block mounted ECM. 

The 1998 & 1999 model years had issues with the “Wait To Start” Light not turning off. When that circuit doesn’t complete the vehicle would not start. We can fix this Cummins ECM before further damage is done to the ECM. After Prolonged “Wait To Start” problems this Cummins ECM will eventually burn out the main processor in the unit. Most other rebuilders do not replace the processor, that’s why you have found Module Experts. We can also fix this if it hasn’t damaged the main board in the unit which is not repairable. 

Plug And Play Programing of the Cummins ECM P/N # 3942336

Fits 1998-1999 Vehicles AT or MT

Please provide us with the following information for plug and play programming.

VIN #

Reference # from Valve Cover 8 digits starting with 53040 followed by 2 letters

AT or MT

4×4 or 4×2

Security or not

Federal or California Emissions.

These ECM’s come with a 1 Year Parts Replacement Warranty

We have a Tech Assist program so if you ever run into any issues you can contact us and speak with one of our 2 ASE Certified Master Techs.

Speak with one of Our Cummins ECM Experts today to figure out which service can best help you